The seeder is a welding construction of a stamped steel profile. Its height is 120 mm, the length is 130 mm, the width is 80 mm.

The seeder consists of the sowing device case, where seeders section is fastened together with the limiting brush, a roller with the sowing bush and the driving wheels. Sowing hub has holes as wide as the seeds, and the spaces between seeds meets the standarts of sowing seeds of definite crops. The machine includes one sowing hub for sowing seeds of radish, carrot, parsley etc. Also you can purchase a hub for other cultures. Holes in the hub should be made according to the guidelines. To guarantee the reliability of the seeder's work and accuracy of sowing, the seeder is provided with a flip-out seed ejector.

The sowing bush of the seeder has pricks, which are made with defined distance. The seeder's complete set also includes a sowing bush forced on a shaft. You can buy sowing bushes for different crops additionally. You can do the holes in a sowing bush using Instructions for drilling works of bushes

Define the necessary sowing norm, by attaching the necessary sowing hub to the shaft. Adjust the position of the brush limiter of sowing for the necessary amount of seeds. The sowing norm can be checked and adjusted by rolling of the full seeder on the plane surface.

Before the sowing, make marks on the row. Sowing is made in a well treated soil by rowing a way with distance between rows according to the crop sowing technology. The soil is rolled up after sowing, and the mulch and watering are performed, if necessary. After works, the sowing seeder must be cleaned of the soil and the seeds.