English (United Kingdom)German (Germany-Switzerland-Austria)EspañolFrench (Fr)Italian - Italy

MECHANIZATION EQUIPMENT

EQUIPMENT FOR MOTOR CULTIVATORS

EQUIPMENT FOR TRACTORS

DRIP IRRIGATION SYSTEMS

Seeder for small seeded crops SMK-1
MECHANIZATION EQUIPMENT
One-row manual seeder SMK-1 for sowing small vegetable seeds
Seeder SMK-1 is used for row sowing of small-seeded vegetable crops in greenhouses and in the open ground.
 

 

smk-1

 

 
Photos
 
Video
 
Documentation
 
Inquiry
 
 
Technical data
 

The seeder is a welding construction of a stamped steel profile. Its height is 120 mm, the length is 130 mm, the width is 80 mm.

 
Design
 

The seeder consists of the sowing device case, where seeders section is fastened together with the limiting brush, a roller with the sowing bush and the driving wheels. Sowing hub has holes as wide as the seeds, and the spaces between seeds meets the standarts of sowing seeds of definite crops. The machine includes one sowing hub for sowing seeds of radish, carrot, parsley etc. Also you can purchase a hub for other cultures. Holes in the hub should be made according to the guidelines. To guarantee the reliability of the seeder's work and accuracy of sowing, the seeder is provided with a flip-out seed ejector.

 

The sowing bush of the seeder has pricks, which are made with defined distance. The seeder's complete set also includes a sowing bush forced on a shaft. You can buy sowing bushes for different crops additionally. You can do the holes in a sowing bush using Instructions for drilling works of bushes

 
Principle of operation
 
smk-1 The principle of the seeder's functioning is based on the rotation of the sowing hub. The seed of the crop get into its calibrated deepening. The brush stopper leaves in every deepening of sowing hub one seed or few (depending on its regulation) which is thrown down into the furrow by the flip-out ejector of original construction. Density of sowing depends on the space between deepenings in the sowing hub and regulation of the brush stopper.
 
Preparing seeder to work
 

Define the necessary sowing norm, by attaching the necessary sowing hub to the shaft. Adjust the position of the brush limiter of sowing for the necessary amount of seeds. The sowing norm can be checked and adjusted by rolling of the full seeder on the plane surface.

 
Sowing
 

Before the sowing, make marks on the row. Sowing is made in a well treated soil by rowing a way with distance between rows according to the crop sowing technology. The soil is rolled up after sowing, and the mulch and watering are performed, if necessary. After works, the sowing seeder must be cleaned of the soil and the seeds.

 
 
Photo in the work

 

 

 
Video
 

 
 

 
Rosta Europe ST

phone: +372 57 53 77 88   e-mail: mail@rostaltd.com
"Rosta Europe.ST" DESIGNER AND MANUFACTURER OF AGRICULTURAL MACHINERY AND SYSTEMS OF DRIP IRRIGATION © 2000-2013
Developed by IPMaster